Procella introducerar två nya förstärkare, Procella DA-05 and the Procella DA-06
The DA-05DSP (or DA-05 for short), is a rack-mount amplifier 1RU, 2 x 600W into 4 ohms, 2 x 300W into 8 ohms, Not bridgeable. Integrated DSP: parametric EQ, adjustable HPF, LPF, X-Over, delay, gain, etc. Wireless control via iPad.
The DA-05DSP has an RRP of (SEK) 16 400:- ex GST/VAT
DA-06DSP (or DA-06 for short) is a rack-mount amplifier 1RU, 2 x 1200W into 4 ohms, 2 x 600W into 8 ohms, Not bridgeable. Integrated DSP: parametric EQ, adjustable HPF, LPF, X-Over, delay, gain, etc. Wireless control via iPad.
The DA-06DSP has an RRP of (SEK) 22 500:- ex GST/VAT.
The amps have Digital (AES) inputs, which avoids the D-A/A-D conversion to the amps, instead keeping the signal digital! Of course you need a processor with digital outputs, such as the Trinnov or the Datasat to take advantage of this feature.
In combination with the Trinnov/Datasat processors, this means that all bi-amping XO for the P860/P815/P610 can be left to these amps. You can also link multiple amps together with one signal, such as the LFE signal, via these Digital AES links, whilst each subwoofer gets it's own level, EQ, etc thanks to the DSP. This saves those valuable output channels in the Trinnov/Datasat!
In combination with A/V receivers and processors which do not have a digital output, you can just use the analog input on the DA-05/DA-06, and you still have the same benefits as above: the amps do the bi-amp XO and can multiply your LFE signal to multiple subwoofers.
The DSP has full Mixer, Level, Delay, XO, EQ capabilities. Only models with DSP are available, no models without DSP! Each of the DA-05 and DA-06 will come with fully pre-programmed DSP for ALL Procella loudspeakers & subwoofers! Just select your model and you are playing! The DSP software is very user friendly, so integrators can then adjust EQ very easily.
The DA-05 at 300W into 8ohms is ideal for all loudspeakers, such as the P8, P6, P5, and the P28 (600W for the P28 as this one is 4 ohms)! Just think about all those P5 and P6iW overhead loudspeakers!
The DA-06 is ideal for all subs:
The P15 has 2 x 8ohm drivers, so when used in parallel (use the bridging cables as supplied) the P15-FP becomes a 4ohm system. The DA-05 will use one channel to deliver 600W into the P15-FP, basically the same as from one channel from the DA2800. We continue to deliver the built-in plate-amp option for the P15-AMP, which delivers 200W into each of the 8ohm drivers. So the DA-05 is 50% more powerful than the plate-amp.
The new P18 will go to 4ohm drivers, which means that the DA-06 will deliver 2 x 1200W to the new P18. The new P18 will only be 'FP', no plate-amp option any more! One 2-channel DA-06 will deliver the same power to the P18-FP as the 4-channel DA-2800!
The P860 will use 2 x DA-05, for 4 x 600W into 4ohms, including the P28. Use the Digital Link to connect these two DA-05 together with one signal.
These amps are Made in Sweden, they operate very silently, their audio quality is Pure Procella, and they are a lot cheaper! They allow your dealers to save valuable channels in the Trinnov/Datasat processors and they offer a cheaper solution for bi-amping. ENJOY!
NB: Please see attached spreadsheet. This calculates the required number of our new Procella DA-05/DA-06 amps for a project, just enter the number of loudspeakers and subs you need for that project! Easy!
First ship: End of April. (The DA-2800 is no longer available.)
Det kommer även ett väggfäste till P5
Även en prototyp på en bas med singel 15" finns...P12 till vänster
Slutligen kommer en ny version av P18 som bara kommer säljas utan inbyggt slutsteg där man istället använder den nya DA-06 förstärkaren
Redigerat av Jolt, 13 October 2016 - 17:49.